Principle of independence

© Artem Zurabyan, 2022

ISBN 978-5-0059-4451-1

Created with Ridero smart publishing system

 
Table of contents
 
 
(English Translation)
 

1. INTRODUCTION

A large part of the population of many countries in the world needs comfortable housing, but not everyone in the cities can afford individual houses and large apartments in luxury multistory frame buildings, so the main capital housing are multistory large-panel buildings. They are built mostly on relatively cheap plots of land or on plots provided practically for free. In these conditions, the cost of the construction of the building significantly affects the cost of apartments, so the task of construction is to reduce the cost of mass houses, which would make housing available to a wider range of people. These requirements are met by multistory large-panel and volumetric block construction. Despite the considerable success of such construction, housing is still an expensive basic necessity.

In many countries there are at best about twenty-five square meters of living space per capita, while in European countries and the United States of America it is about forty five to sixty five square meters. Thus the housing stock should be doubled in order to achieve an acceptable level. At the same time, given the climatic conditions, the cost of land and structures, to abandon multistory building is unlikely. And if so, on the contrary, high-rise construction is moving to high-rise construction. This trend has been observed recently in many countries. Thus, the task of significantly reducing the cost of construction of high-rise buildings remains relevant.

For centuries it has been customary for all houses to be built in Cartesian coordinate system. The main methods of mass construction such as large-panel, volumetric-block and frame construction are based on Cartesian coordinates. At the same time, frame construction is considered to be more expensive.

It has always been assumed that Cartesian coordinates allow creating the most inexpensive method of construction of capital housing. But is this true? It turns out that for high-rise housing is not quite so. It is possible to create a different system of industrial high-rise housing construction where the cost of housing will be significantly lower compared to even the most inexpensive panel or volumetric block houses. It can be achieved if to refuse from Cartesian coordinates and to assume that it is possible to create non-linear laws of building structure formation which will be even more economical. We call this system «Lotus». It changes our idea of affordable mass housing, and creates new forms of living space.

Architectural solutions for this change is described in more detail in the book, published on the platforms of LitRes and Kobo with the title «Unusual „Lotus“ apartments – an alternative to panel construction. Part 1. Architecture.»

This book attempts to show more fully that the functional activity of residents is independent of the system from the coordinates of the enclosing structures of residential modules. Architectural aspects of this approach are expanded. A comparison of apartments in «Lotus» houses and apartments in large-panel buildings at the same cost is given. Analyzed the planning possibilities and various solutions of the facades of the «Lotus» system. For many of these technical solutions patents have been obtained.

2. PRINCIPLE OF INDEPENDENCE
2.1 Cartesian coordinate system and independence principle

Since time immemorial, people have tried to create enclosing structures to create an enclosed comfortable environment, to protect against weather changes of rain, cold or heat and to protect against external threats. Enclosed spaces were formed by various technological methods, depending on their form, sometimes changing over time, and often replicated even for centuries. The enclosing structures are almost always vertical walls and horizontal slabs. It is often cited that the forms of such space created must be cells capable of uniting with each other or, on the contrary, of dividing within themselves, in accordance with the forms of equipment and with the various functions of man.

The unification of cells took place not only in the plane of plots of land, but also vertically, which led to the creation of multistory structures known already in Ancient Rome. However, it is natural that the replication of the upper floors is almost always possible only simultaneously with the lower floors. Massively such structures were used for housing, but there were also public buildings. Replication of artificial structures led to the creation of settlements and then cities, mainly consisting of a set of residential cells for the family and public facilities.

The form of spatial cells was conditioned by two circumstances. The first is the need to multiply and divide the space into planes with common enclosing structures for adjacent cells. To achieve uniformity, enclosures must be rectilinear in plan. The second is the technological methods of construction. In most countries, it is a mullion-beam system, easily implemented with the availability of forest materials. Even if the vertical building envelopes are not made of wood, in the early stages of mass construction in most cases were made of wood slabs. All this in the most standardized form is most easily created in the Cartesian system of coordinates.

But this was not always the case. If plots of land are not limited in area, such as steppe areas, and there is no forest in the required quantity, then the need for an external indissoluble division of space is absent. Other forms of spatial cells emerge, such as freestanding yurts. However, this type of cells is still dying out, yielding to the technology of rectilinear forms of enclosing structures, as the functions become more complex and not only enclosing structures are required, but also the saturation of cells with new technologies. In this regard, there is a need even in these areas to compactly integrate cells and structures assembled from them. There remains a predominantly Cartesian system, which allows to divide and replicate the indissoluble space.

Along with the mass construction of residential spatial forms, public ones became increasingly important and their importance increased, so settlements and cities look like a combination of such structures. Most often they consist of independent sections of residential and public buildings, so they are exempt from the functions of division and replication between them. As a consequence, Cartesian coordinate systems for public buildings are no longer necessary. They can be replicated within the building plots and upwards, and the division within them can be more arbitrary. All this created and creates a variety of forms in the architecture of public buildings.

The development of public facilities and mass housing is a complex process that has led to modern architecture and the conventional gradation of such facilities in cities into two groups. The first includes mostly public buildings of cities sometimes and industrial use, and the second is the mass housing. A favorite area of most famous architects is the first group. It is most often limited by the characteristics of the building sites and is less burdened by technological requirements. Moreover, the vast majority of such sites are based on a significant construction budget. In many cases, that budget is overridden as well, because the unfinished facility is even more unprofitable. This tidbit of architecture allows the creation of incredible architectural masterpieces that glorify the creators. Often behind the architects are statesmen trying to perpetuate their time in power.

Such facilities are necessary and pay for themselves indirectly by attracting the flow of tourists, which can be many millions. Skyscrapers that amaze everyone with their height and unusual designs and facades create an attractive emotional environment, which often pays for itself in this way, despite the considerable expense involved. Such buildings can be compared to sculptures, admiring the craftsmanship of the authors and presenting mainly only artistic value. Naturally, in some cases, such iconic structures also pay for themselves by renting space and selling it.

The second group is predominantly high-rise residential buildings, but among them some also have the functions of public buildings. This is a more complex group, because it includes high-rise buildings and skyscrapers. In addition, it is divided into classes, such as luxury housing, business class, comfort class and economy class. In many respects this classification is arbitrary, so it is often officially changed. It should also be noted that individual residences may also be included in this group.

The class of residential high-rise and individual buildings is of great importance. Elite location, which can also be attributed to the first group of structures with public buildings, completely throws off the importance of such a factor as the cost of structures. In architectural terms, these objects are the same field of action of famous architects who create one-of-a-kind buildings. Individual residences, which are often transformed into expensive mansions, also belong to the elite.

The business class of high-rise housing can also be characterized as individual structures, depending on the location, and their owners are able to pay almost entirely for such housing or even have several residential properties possibly in different countries. Here already the cost of construction begins to affect the prices, but still the location has a decisive role. Conventionally, we can assume that this is the second line in terms of location. Individual houses of business class are located mostly in elite cottage settlements and are notable for their relatively large area. Such houses are not inexpensive, but are almost always readily available to their owners. They are often built by professional architects.

The comfort class is multistory houses, which are already largely subject to the price of construction. It is designed for a large group of the population, perhaps the largest group. Such housing is often already purchased through mortgages and as a result of changing a smaller apartment to a larger one. Architecturally, these are mass housing projects constructed in neighborhoods of typical or repetitive designs. This is a kind of third line in location, but such houses are also built in quite distant completely comfortable neighborhoods. Individual houses in this category are most likely to have enough space for comfortable living without excesses and with controllable construction and maintenance costs. Architectural solutions of individual houses of this class are most often based on standard designs.

Economy class is already social housing, although it is often purchased with mortgages. In many cases, the location does not matter in this case, and the main goal is to provide affordable housing for those in need. Such houses are often built at the expense of the state. Economy class may be excluded and represented as comfortable housing with simplified finishing. There are no stringent requirements for the architectural appearance of such houses, which require large expenditures. To the individual houses of economy class conditionally can be attributed with minimal space with a variety of individual and typical architecture

This gradation of architectural objects is necessary to determine what share in the construction of housing occupy the mass structures in which their price affects the cost of houses in general. It can be seen that the most tense situation arises in the comfort and economy classes, where the needs of tenants are limited by the cost. The majority of the population, even if the family is provided with housing, does not have enough space, and most owners would like to substantially increase it, but many do not have this financial possibility.

The impact of the cost of land for high-rise construction is so significant that this factor is felt when comparing housing prices in different cities. In large cities it leads to the fact that the cost of construction is practically not decisive. It only affects their outskirts. It gets to the point where the most expensive structures become cost-effective, thanks to the high cost of housing, and pay for themselves in any case. This situation applies not only to elite and business-class houses, but also to the comfort class, so there is absolutely no incentive to reduce the cost of construction.

However, if cities are small or new high-rise areas are built for comfortable and economy-class housing, especially at the expense of the state, the cost factor begins to significantly affect the overall situation. Even in large cities on the outskirts, if there is inexpensive land, reducing the cost, you can provide affordable housing for large segments of the population for whom this is an inaccessible task. In fact, attempts are being made to ration the minimum and maximum area of housing that would make it affordable for residents who buy it on a mortgage or under social programs. Often people get a smaller apartment than they need, but in this way the housing problem is solved. The lack of living space is felt in almost every family, even if they think this problem is solved for them.

The situation with individual construction is simpler, as having a plot of land allows one to build houses with a larger area, sometimes even larger than necessary. Individual construction is significantly affected by climatic conditions. Houses in southern areas at the same cost have a much larger area than houses built in harsher conditions. The necessary infrastructure is also cheaper.

There are two ways to increase the housing stock. The first is the expansion of cities with the construction of new centers of such a level that their significance would be comparable with the existing historical centers. It is desirable that all classes of housing would be represented, and comfort-class and social housing would be built at prices with a minimum construction cost. The second way is the construction of new cities, including million-strong cities, attractive from an urban planning point of view and with a low cost of housing. This would dramatically increase the housing stock and not parasitize on the high cost of housing in the historic development of existing cities.

Conditionally dividing all urban planning objects into two groups, we can determine that the group of public buildings is not necessarily designed in the Cartesian coordinate system, and the group of housing is mainly designed and built in it. Residential buildings in the Cartesian system of coordinates is a well-established centuries-old system, as indicated, justified by the need for division and indissoluble replication of housing cells. Replication in multistory houses is practically possible only simultaneously with the first floors, so in this case only the internal division of areas plays an essential role.

The convenience of the Cartesian coordinate system allows almost anyone to build a dwelling by division and replication even without special education. If it is not done professionally and not quite thought out, such a dwelling can be operated even with domestic difficulties. Almost all people, having certain living cells on their own, and sometimes with the help of professionals, are engaged in division of cells arranging in them the elements of furniture.

As a rule, there are two ways of arranging furniture in rectangular in plan cells. The first, when space is limited, is practically unbreakable division, i.e. a dense layout. The second way is a free layout if there is excess space. Since more often than not there is not enough space, the first method prevails. At the same time, residents face the task of placing the elements in a specific tightly constrained size of the area. We have to choose the size of furniture of appropriate dimensions. There is a system of modules that determine the basic parameters of the equipment, but the construction dimensions may be different and in a dense arrangement of there is a need to reckon with it. Almost all homeowners face this problem.

Thus, the Cartesian coordinate system for small areas, although simple, but poses in most cases difficult division tasks for almost all residents. It is easier to solve everything when there is some excess space, when it is possible to freely arrange the furniture with fewer construction constraints. Spacious homes with some excess space make the task of furnishing and installing appliances much easier. In a sense, small spaces are sometimes attractive because they limit owners’ desire to purchase excessive home furnishings.

Horizontal ceilings are an inviolable element in the construction of multistory houses. It is almost impossible to move away from the need to perform them in the form of flat structures, whether they are girder systems or slabs. In any case, the upper surface must be flat. In the Cartesian coordinate system, residential cells also have flat vertical enclosing structures. Flat wall structures that separate adjacent rooms are almost always the same thickness along the length.

The aesthetic perception of the plane imposes certain requirements on their quality. Such a plane must be so precise, in terms of deviation from ideal dimensions, that it must also be perceived as perfectly flat. In terms of mass construction is an expensive procedure that requires a significant cost, but which is perceived as inevitable. It is exacerbated by the subsequent desire to create multiple layers of high-quality finishes, often including plaster, putty, paint or other finishes, the price of which, to meet the ideal plane, often becomes even comparable to the cost of construction. Thus, the enclosing, relatively perfect plane becomes a labor-intensive, expensive structure even when inexpensive layers of finishing materials are used.

Cost-effectiveness of mass residential high-rise buildings, even in relatively expensive areas of development is still of great importance, since the same typical structures are also applicable to houses of economy class. In Cartesian coordinates, the most economical construction is a box structure. Most cities are a combination of different types of box systems. To avoid the complete monotony of structures in the Cartesian coordinate system, the buildings are saturated with different elements, allowing to change the appearance of the box system. This applies to both high-rise residential and public buildings.

The main techniques that allow to get away from the boxed structure are the mutual displacement of boxed volumes, the creation of protruding elements such as balconies and loggias, the use of bay windows of various shapes. On the first floors, mullion-beam structures are sometimes installed. In many cases, in order not to lose the attractiveness of structures, apply high-quality not cheap finish of the flat facade edges of rectangular structure, such as tile materials. Naturally, all the additional elements lead to an increase in the cost of a simple box system. When building on expensive development sites, these costs are not crucial and are covered by the high market value of the housing.

The experience of construction in Cartesian coordinates of panel houses with the complete elimination of all excesses was at the beginning of the development of this method of house-building. It showed how inexpressive the architecture of such buildings is, that is, the Cartesian coordinates in the most economical case – it is monotonous houses, which can be changed by complicating and increasing the cost. Nevertheless, there were successful solutions, for example, the Lazdynai district in Vilnius. But here, too, without some additions and to the box structure, therefore, additional costs did not do.

Thus the Cartesian coordinate system creates inseparable living spaces easily divisible, but requiring special treatment of flat building envelopes and additional costs for the decoration of the box structure of buildings. Nevertheless, the simplicity of the mullion-beam system based on woodworking technology and, subsequently, on rolling metal technology, which often serves as a form for concrete products, has helped and helps to develop such construction.

In all multistory buildings, it is practically impossible to change the planar solution of the slab tops, but the axes of the vertical wall planes need not be constructed in plan in Cartesian coordinates. Their direction can be changed. They can be located in the polar coordinates rays, can be combined with rectilinear axes having modified non-rectangular angles between themselves and theoretically any, therefore, the walls themselves in the plan can have a variety of shapes. This allows the rooms they enclose to have differently shaped areas.

If there is a surplus of area and large spans, then the functions flowing in these areas may well be incorporated into the nonlinear nonlinear envelopes. In this connection, we can assume that the functions flowing on the floors do not depend on the shape of enclosing structures and, consequently, on the coordinate system to which they are attached. Thus, there exists the principle of independence of functions from the system of coordinates and envelope structures attached to them in construction.